configure mpls rsvp-te lsp path use profile

configure mpls rsvp-te lsp lsp_name path [path_name | any] use profile profile_name

Description

Changes the profile that the configured LSP path uses.


`lsp_name`	Specifies the RSVP-TE LSP.
`path_name`	Specifies the configured RSVP-TE LSP path.
`profile_name`	Specifies a profile to be applied to the configured LSP path.

N/A.

This command changes the profile that the configured LSP path uses.

Note

Changing the profile while an LSP is active may cause the LSP to be torn down and re-signaled.

The following command configures the switch to apply the LSP profile gold-class to the LSP path sydney-bypass for the LSP aus:

configure mpls rsvp-te lsp aus path sydney-bypass use profile gold-class

This command was first available in ExtremeXOS 11.6.

This command is available only on the platforms that support MPLS as described in the Switch Engine v33.1.1 Licensing Guide document.